TS Module
A temperature sensor (TS) module has the following mandatory standard parameters:
| Parameter | Meaning | Examples |
|---|---|---|
| Resource | The connection information needed to connect to this device. Depending on the type of device this can be a COM port, a GPIB address, an IP address or something else. Most drivers are based on VISA, which brings its own syntax to provide a GPIB or IP address. The VISA resource names can usually be looked up in NI Max. | COM1 |
| MinTemp | The lower temperature limit in °C. This value can be changed through the LTT GUI. The GUI will stop all running tests if this limit will be violated. | -41 |
| MaxTemp | The upper temperature limit in °C. This value can be changed through the LTT GUI. The GUI will stop all running tests if this limit will be violated. | 120 |
Depending on the specific TS module, there might be additional parameters, which are described here.
You can access the TS control panel through GUI and also via TestStand..